apple PowerBook G4 (Titanium 400 and 500MHz) 02 free download

File name PowerBook G4 (Titanium 400 and 500MHz) 02.pdf

PowerBook G4 (Titanium) - 400, 500 MHz AppleCare Updated : 04-06-2002 Take Apart TITLE Writer: Huckabone, Michael Created: 2001-7-20 PowerBook G4: AirPort Card Not Recognized Modified: 2001-8-17 TOPIC AirPort Card not recognized. DISCUSSION *RESTRICTED: Apple Specialists/Apple-Authorized Self-Servicing Providers * Internal Use Only Troubleshooting Procedure The steps to solve a symptom are listed sequentially. You might not need to perform every step before the symptom is solved. Start with the first step, and then test for the symptom. If the symptom persists, replace any modules you removed, go to the next step, and test again. Continue down the list until the symptom is solved. 1. Use Software Update control panel or see the Apple Software Updates web page to make sure the latest version of AirPort software is installed. 2. Boot using Mac OS All extensions setting. 3. Reseat AirPort Card. 4. Remove and reinstall the AirPort software. 5. Replace with known-good AirPort Card. 6. Replace logic board. Document Information Product Area: PowerBook G4 Category: PowerBook G4 Hardware Sub Category: Troubleshooting Keywords: kpbook kssts hts Contributor: Process Owner: TITLE Writer: Huckabone, Michael Created: 2001-7-20 PowerBook G4: Battery Will Not Eject Modified: 2001-8-17 TOPIC Releasing the battery latch does not eject the battery. DISCUSSION *RESTRICTED: Apple Specialists/Apple-Authorized Self-Servicing Providers * Internal Use Only Troubleshooting Procedure The steps to solve a symptom are listed sequentially. You might not need to perform every step before the symptom is solved. Start with the first step, and then test for the symptom. If the symptom persists, replace any modules you removed, go to the next step, and test again. Continue down the list until the symptom is solved. 1. Flip over the unit and release the battery latch by sliding the latch towards the PC Card button. 2. If the battery still will not eject, while holding the latch towards the PC Card button, use a small plastic flat-blade tool to pry the battery around the battery latch. 3. Verify proper latch operation, by exercixing the latch. If it does not move smoothly or evenly, replace rib chassis assembly. 4. If the latch does ex